MiniWater6 micro 5 m/s (vane and handle in alu)
Product information "MiniWater6 micro 5 m/s (vane and handle in alu)"
Process measuring device - voltage signal
The MiniWater6 micro probe made of plastic and aluminium is useable for flow measurement in waters. There are two different flow measuring ranges 0,04 to 5 m/s and 0,05 to 10 m/s. With a measuring accuracy of the flow of 2,0 % F.S. and 3,5 % o.r. is the use of a vane anemometer most exact measurement method. The probe is usable in temperatures from 0 to +70°C. You need an external input of 9 to 26 V DC for the electricity supply. The probe has an output signal of 0 to 2,0 V. It is possible to expose the MiniAir6 with a load of the external device of 10 kΩ . The cable is 2 m long.
With the following measurements the micro is our smallest snap head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.