MiniAirPro Macro

SFR 1,070.00*

Environmental Temparature
Measuring range
Output
Product number: SW10092.8
Product information "MiniAirPro Macro"

MiniAirPro Macro plastic/aluminum up to 80°C / non-aggressive gases Flow measuring ranges: 0.2 - 20 m/s or 0.3 - 40 m/s Output signal: 4 - 20 mA, 0 - 1 Volt, Hz according to table Measuring accuracy: 1.0 % f.s. and 1.5 % f.s. Operating temperature: -30 to 80ºC Temperature measurement with accuracy of +/-0.5°C Cable length: 5 m Head diameter: 80 x 85 mm; probe length 235 mm Thanks to the renowned snap-on head principle, the sensors are suitable for continuous operation. The measuring head can be replaced in just a few simple steps.

MiniAirPro Macro brass/aluminum up to 140°C / aggressive gases Flow measuring ranges: 0.2 - 20 m/s or 0.3 - 40 m/s Output signal: 4 - 20 mA, 0 - 1 Volt, Hz according to table Measuring accuracy: 1.0 % f.s. and 1.4 % f.s. Operating temperature: -30 to 140ºC Temperature measurement with accuracy of +/-0.5°C Head diameter: 80 x 85 mm; probe length 235 mm The blades can be exchanged if required.

suitable

Replacement Snap-heads
Schnappkopfgrösse: Macro | Measuring range: 20 m/s
MiniAir Micro snap-on head up to 140°C / non-aggressive gases Flow measuring ranges: 0.6 - 20 m/s or 0.7 - 40 m/s Measuring accuracy: 1.0 % f.s. and 1.5 % f.s. MiniAir Mini snap-on head plastic/aluminum up to 140°C / non-aggressive gases Flow measuring ranges: 0.4 - 20 m/s or 0.5 - 40 m/s Measuring accuracy: 1.0 % f.s. and 1.5 % f.s. MiniAir Macro plastic/aluminum up to 140°C / non-aggressive gases Flow measuring ranges: 0.2 - 20 m/s or 0.3 - 40 m/s Measuring accuracy: 1.0 % f.s. and 1.5 % f.s.The measuring heads can be exchanged in just a few simple steps.

Variants from SFR 230.00*
SFR 470.00*