MiniAir64 micro 20 m/s ATEX (probe completely in steel)
Product information "MiniAir64 micro 20 m/s ATEX (probe completely in steel)"
Process measuring device - linear current signal
MiniAir64 micro ATEX plastic/alu
Classification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir64 ATEX made of aluminium and plastic is suitable to use it in the environment of explosive/inflammatory substances.
There are two different flow measuring ranges 0,6 to 20 m/s and 0,7 to 40 m/s.
With a measuring accuracy of the flow of 1,0 % F.S. and 3,0 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +100°C.
An external supply of 9 to 24 V DC is necessary for the electricity supply.
The output signal of the probe is 4 to 20 mA.
The cable is 5 m long.
With the following measurements the micro is our smallest snap head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.
There are two different flow measuring ranges 0,6 to 20 m/s and 0,7 to 40 m/s.
With a measuring accuracy of the flow of 1,0 % F.S. and 3,0 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +100°C.
An external supply of 9 to 24 V DC is necessary for the electricity supply.
The output signal of the probe is 4 to 20 mA.
The cable is 5 m long.
With the following measurements the micro is our smallest snap head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.
MiniAir64 micro ATEX stainless steel
Classification II 2G EEx ia IIC T6 / I M2 EEX ia IThe MiniAir64 ATEX made of stainless steel is suitable to use it in the environment of explosive/inflammatory substances.
There are two different flow measuring ranges 1,0 to 20 m/s and 1,3 to 40 m/s.
With a measuring accuracy of the flow of 1,5 % F.S. and 3,5 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +100°C.
An external supply of 9 to 24 V DC is necessary for the electricity supply.
The output signal of the probe is 4 to 20 mA.
The cable is 5 m long.
With the following measurements the micro is our smallest probe head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
If required the head can be replaced by us.
There are two different flow measuring ranges 1,0 to 20 m/s and 1,3 to 40 m/s.
With a measuring accuracy of the flow of 1,5 % F.S. and 3,5 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +100°C.
An external supply of 9 to 24 V DC is necessary for the electricity supply.
The output signal of the probe is 4 to 20 mA.
The cable is 5 m long.
With the following measurements the micro is our smallest probe head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
If required the head can be replaced by us.