MiniAir60 macro 20 m/s (vane and handle in alu)
Product number:
SW10046.2
Product information "MiniAir60 macro 20 m/s (vane and handle in alu)"
Process measuring device - frequency signal
The MiniAir60 made of aluminium and plastic is suitable to use it in the environment
of non aggressive gas and fluids.
There are two different flow measuring ranges 0,2 to 20 m/s and 0,3 to 40 m/s.
With a measuring accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +80°C.
An external power of 4,5 to 5,5 V DC is necessary for the electricity supply.
The output frequency of the probe is 0-960 Hz (20m/s) and 0-927 Hz (40m/s).
With an unloaded supply of 5 V DC the outputsignal is 0-4 V.
Every probe with a frequency output is TTL compatible.
The cable is 5 m long.
With the following measurements the macro is our biggest snap head:
head diameter 85 x 80 mm; probe length 225 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.
of non aggressive gas and fluids.
There are two different flow measuring ranges 0,2 to 20 m/s and 0,3 to 40 m/s.
With a measuring accuracy of the flow of 1,0 % F.S. and 1,5 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +80°C.
An external power of 4,5 to 5,5 V DC is necessary for the electricity supply.
The output frequency of the probe is 0-960 Hz (20m/s) and 0-927 Hz (40m/s).
With an unloaded supply of 5 V DC the outputsignal is 0-4 V.
Every probe with a frequency output is TTL compatible.
The cable is 5 m long.
With the following measurements the macro is our biggest snap head:
head diameter 85 x 80 mm; probe length 225 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.