MiniAir6 micro 20 m/s
Product number:
SW10039.1
Product information "MiniAir6 micro 20 m/s "
Process measuring device - voltage signal
The MiniAir6 micro made of plastic and aluminium is suitable to use it in the environment of non aggressive gas and fluids.
There are two different flow measuring ranges 0,6 to 20 m/s and
0,7 to 40 m/s. With a measuring accuracy of the flow of 1,0 % F.S. and 3,0 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +80°C.
You need an external supply of 9 to 26 V DC for the electricity supply.
The probe has an output signal of 0 to 2,0 V.
It is possible to expose the MiniAir6 with a load of the external device of 10 kΩ .
The cable is 2 m long.
With the following measurements the micro is our smallest snap head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
There are two different flow measuring ranges 0,6 to 20 m/s and
0,7 to 40 m/s. With a measuring accuracy of the flow of 1,0 % F.S. and 3,0 % o.r. is the use of a vane anemometer most exact measurement method.
The probe is usable in temperatures from -10 to +80°C.
You need an external supply of 9 to 26 V DC for the electricity supply.
The probe has an output signal of 0 to 2,0 V.
It is possible to expose the MiniAir6 with a load of the external device of 10 kΩ .
The cable is 2 m long.
With the following measurements the micro is our smallest snap head:
head diameter 11 x 15 mm; access opening 16 mm; probe length 165 mm
The probe should be stored in temperatures from -65 to +150°C.
Because of the snap head principle our probes are useable for a non-stop operation and the head is easily changeable.